Generated by All in One SEO v4.9.10, this is an llms.txt file, used by LLMs to index the site.

# Harris Thermal

Heat Exchangers, Pressure Vessels, Fabrication, Portland Oregon

## Sitemaps

- [XML Sitemap](https://harristhermal.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [**Pressure leaching and autoclaves in mineral processing: how the process works and what the equipment must handle**](https://harristhermal.com/2026/08/31/pressure-leaching-and-autoclaves-in-mineral-processing-how-the-process-works-and-what-the-equipment-must-handle/) - Pressure leaching dissolves or transforms target minerals inside a sealed vessel held above the normal boiling point of the solution. Raising temperature accelerates reactions that run too slowly at atmospheric conditions. Raising pressure keeps the aqueous phase liquid and forces reactant gas into solution. The vessel that provides those conditions is an autoclave. Pressure and
- [**AI data center liquid cooling: where heat exchangers fit in the cooling infrastructure**](https://harristhermal.com/2026/08/25/ai-data-center-liquid-cooling-where-heat-exchangers-fit-in-the-cooling-infrastructure-2/) - A single high-density AI training rack can draw more than 100 kW. Uptime Institute puts the NVIDIA GB200 NVL72 at roughly 132 kW in a 19-inch frame — about 100 kW to cold plates, with more than 25 kW still rejected to air. The challenge does not end at the cold plate. That heat still
- [**Nuclear process equipment fabrication: NQA-1 quality assurance and traceability**](https://harristhermal.com/2026/08/17/nuclear-process-equipment-fabrication-nqa-1-quality-assurance-and-traceability/) - An inquiry package arrives for a shell-and-tube exchanger. The data sheet is unremarkable: 316L, TEMA R, ASME Section VIII, Division 1 — a duty a shop has run a hundred times. Behind it sits a supplier quality requirements attachment running dozens of pages. It invokes a quality assurance standard, hold points, submittals for approval, and
- [Understanding pressure vessel design codes](https://harristhermal.com/2026/08/07/understanding-pressure-vessel-design-codes/) - Learn how the mandatory 2026 ASME BPVC updates shift accountability to manufacturers and compare international standards like EN 13445 and PD 5500.
- [**Exotic alloy heat exchangers for chemical service: Hastelloy, Inconel, titanium, and zirconium**](https://harristhermal.com/2026/08/07/exotic-alloy-heat-exchangers-for-chemical-service-hastelloy-inconel-titanium-and-zirconium/) - A tube bundle fails in eighteen months, and the metallurgical report says the alloy was never wrong on paper. Type 316L was rated for the acid, temperature sat inside the published range, and the corrosion allowance was generous. What the specification missed was a trace of ferric ion carried over from an upstream oxidation step,
- [**Exotic alloy heat exchangers for chemical service: Hastelloy, Inconel, titanium, and zirconium**](https://harristhermal.com/2026/08/07/exotic-alloy-heat-exchangers-for-chemical-service-hastelloy-inconel-titanium-and-zirconium-2/) - A tube bundle fails in eighteen months, and the metallurgical report says the alloy was never wrong on paper. Type 316L was rated for the acid, temperature sat inside the published range, and the corrosion allowance was generous. What the specification missed was a trace of ferric ion carried over from an upstream oxidation step,
- [Signs your heat exchanger needs repair or replacement](https://harristhermal.com/2026/07/28/signs-your-heat-exchanger-needs-repair-or-replacement/) - Learn the quantitative indicators (U-value drift, Delta-P trends, tube failure rates) that signal when a shell-and-tube heat exchanger needs repair, retubing, or replacement.
- [Industries that use falling film evaporators (and why)](https://harristhermal.com/2026/06/18/industries-that-use-falling-film-evaporators/) - Falling film evaporators serve food, water treatment, and chemical industries. Learn how the same physics drives different engineering choices for each application.
- [Types of reboilers: kettle, thermosiphon, and forced circulation explained](https://harristhermal.com/2026/06/16/types-of-reboilers/) - Learn how kettle, thermosyphon, forced circulation, and internal reboilers work and which process conditions determine the right choice for your column.
- [What does the ASME U-stamp mean and why does it matter?](https://harristhermal.com/2026/06/16/what-does-the-asme-u-stamp-mean/) - Learn what the ASME U-stamp certifies, how the three-year audit works, what Form U-1 proves, and how to evaluate a fabricator's credentials before you sign.
- [What is the difference between a pressure vessel and a storage tank?](https://harristhermal.com/2026/06/11/pressure-vessel-vs-storage-tank/) - Learn why the 15 PSI threshold separates pressure vessels from storage tanks: what it means for design codes, materials, inspection costs, and liability.
- [How long does a shell and tube heat exchanger last?](https://harristhermal.com/2026/06/10/how-long-does-a-shell-and-tube-heat-exchanger-last/) - The "20–25 year" lifespan answer is nearly useless. Learn which design and maintenance decisions actually control where your unit lands.
- [Types of industrial evaporators and how to choose](https://harristhermal.com/2026/06/09/types-of-industrial-evaporators-and-how-to-choose/) - Learn how feed behavior, materials, and fabrication scale determine the right industrial evaporator before you name a configuration.
- [What is a zero liquid discharge (ZLD) system?](https://harristhermal.com/2026/06/04/what-is-a-zero-liquid-discharge-zld-system/) - Learn what a zero liquid discharge system does, why three distinct technologies work in sequence, and what drives the energy cost of true ZLD.
- [Understanding falling film evaporator design](https://harristhermal.com/2026/05/21/understanding-falling-film-evaporator-design/) - Learn the mathematical and metallurgical realities of falling film evaporator design, from calculating minimum wetting rates to specifying high-nickel alloys.
- [ASME vs non-code pressure vessels: when compliance is actually required](https://harristhermal.com/2026/05/21/asme-vs-non-code-pressure-vessels-when-compliance-is-actually-required/) - Compare ASME vs non-code pressure vessels to understand jurisdictional mandates, insurance liabilities, and the hidden costs of non-compliance.
- [TEMA vs non-TEMA heat exchangers: when standards matter](https://harristhermal.com/2026/05/21/tema-vs-non-tema-heat-exchangers-when-standards-matter/) - Compare TEMA vs non-TEMA heat exchangers to balance mechanical reliability with capital efficiency. Learn when to specify standards and when to save.
- [What to look for in a heat exchanger manufacturer](https://harristhermal.com/2026/05/19/what-to-look-for-in-a-heat-exchanger-manufacturer/) - Choosing an industrial heat exchanger manufacturer requires evaluating their in-house fabrication scale, consultative engineering, and maintainability.
- [What is a falling film evaporator, and when does it outperform alternatives?](https://harristhermal.com/2026/05/19/what-is-a-falling-film-evaporator/) - Learn how falling film evaporators work, when to specify them over alternatives, and how to manage viscosity thresholds and vapor recompression at scale.
- [Understanding TEMA classes: R, C, and B](https://harristhermal.com/2026/05/19/understanding-tema-classes-r-c-and-b/) - Learn the specific mechanical differences between TEMA classes R, C, and B, and how to avoid costly over-specification in your heat exchanger designs.
- [What is a shell and tube heat exchanger, and when does it outperform alternatives?](https://harristhermal.com/2026/05/19/what-is-a-shell-and-tube-heat-exchanger/) - Learn how the mechanical architecture of shell and tube heat exchangers allows them to survive the extreme pressure and thermal shock that destroy other systems.
- [Understanding ASME pressure vessel fabrication](https://harristhermal.com/2026/05/19/understanding-asme-pressure-vessel-fabrication/) - Learn how the 2026 ASME BPVC updates change pressure vessel fabrication, from Division 2 material efficiency to managing metallurgical risks.
- [What is a TEMA heat exchanger?](https://harristhermal.com/2026/05/13/what-is-a-tema-heat-exchanger/) - A buyer's guide to TEMA heat exchanger classifications, nomenclature, and how specific configurations impact maintenance costs and operational reliability.
- [Getting started with orbital tube welding](https://harristhermal.com/2026/05/07/getting-started-with-orbital-tube-welding/) - Learn how to move past factory auto-programs to baseline metallurgy, adjust purge times, and scale orbital tube welding for heavy industrial fabrication.
- [Orbital tube welding vs manual TIG: when automation wins](https://harristhermal.com/2026/05/04/orbital-tube-welding-vs-manual-tig/) - Compare orbital tube welding and manual TIG to see when automated systems deliver real ROI and when manual setup time makes traditional welding superior.
- [What is ASME pressure vessel fabrication?](https://harristhermal.com/2026/05/04/what-is-asme-pressure-vessel-fabrication/) - Learn how the 2026 ASME BPVC updates change pressure vessel fabrication, shifting focus from commoditized compliance to engineering precision and material verification.
- [Understanding shell and tube heat exchanger design](https://harristhermal.com/2026/05/04/understanding-shell-and-tube-heat-exchanger-design/) - Discover how modern shell and tube heat exchanger design balances thermal software simulations with mechanical limits and material economics.
- [Building with Modular components](https://harristhermal.com/2021/11/03/3rd-post/) - This is Harris Thermal is Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean neque lacus, varius quis faucibus scelerisque, condimentum nec nibh. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce ac massa sed massa ultrices venenatis nec in nunc. Nulla semper erat sit amet ante vulputate tempus. Sed odio risus, eleifend congue nulla
- [Another example](https://harristhermal.com/2021/10/12/hello-world/) - Harris Thermal is proud to announce Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean neque lacus, varius quis faucibus scelerisque, condimentum nec nibh. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce ac massa sed massa ultrices venenatis nec in nunc. Nulla semper erat sit amet ante vulputate tempus. Sed odio risus, eleifend congue
- [Blog post example](https://harristhermal.com/2021/11/03/new-employee/) - Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean neque lacus, varius quis faucibus scelerisque, condimentum nec nibh. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce ac massa sed massa ultrices venenatis nec in nunc. Nulla semper erat sit amet ante vulputate tempus. Sed odio risus, eleifend congue nulla eget, interdum euismod turpis. Donec

## Pages

- [Home](https://harristhermal.com/) - Welcome to Harris Thermal WHO WE ARE Harris Thermal Transfer Products has served customers worldwide since 1885. We are an ASME certified industrial fabricator with a passionate commitment to designing, building and repairing custom equipment on time and with the highest level of quality. We fabricate custom TEMA Shell and Tube Heat Exchangers, ASME Code
- [Contact](https://harristhermal.com/contact-us/) - P.O. Box 820615 S. Springbrook RoadNewberg, Oregon 97132 TF: 800-767-9507 Tel: 503-538-1260 Fax: 503-538-4281 Map & Directions to Harris Thermal
- [Nuclear](https://harristhermal.com/nqa1-nuclear/)
- [General Manufacturing Industry ](https://harristhermal.com/general-manufacturing-industry/) - Harris Thermal provides general manufacturing industry equipment including heat exchangers, vessels, tanks, and skid systems—ASME-certified and custom engineered
- [Other Fabrication](https://harristhermal.com/other-fabrication/) - Have a challenging custom piece of equipment? Let Harris Thermal be your trusted fabrication partner to complete your project on time and with the highest quality while meeting the most stringent specifications. From nuclear test equipment to concept design specialty equipment HTTP has had many successful projects that land outside of what many fabricators would
- [Thank you!](https://harristhermal.com/thank-you/) - Your submission has been successfully submitted. Our team will reach out to you shortly. Thank you for contacting Harris Thermal Transfer Products. Return to Home
- [About Us](https://harristhermal.com/about-us/) - Discover Harris Thermal Transfer Products, an ASME-certified industrial fabricator with over a century of experience in custom heat exchangers, pressure vessels, and custom equipment. Serving global industries with precision, integrity, and excellence.
- [Harris Thermal Transfer Products FAQs](https://harristhermal.com/harris-thermal-transfer-products-faqs/) - Explore Harris Thermal Transfer Products FAQs. Answers on ASME-certified heat exchangers, pressure vessels, materials, and maintenance backed by 140+ years of expertise.
- [Liquefied Natural Gas Equipment (LNG)  ](https://harristhermal.com/liquefied-natural-gas-equipment/) - Harris Thermal designs liquefied natural gas equipment including heat exchangers, absorbers, and ASME vessels—engineered for LNG processing and storage.
- [Chemical Industry Equipment ](https://harristhermal.com/chemical-industry-equipment/) - Harris Thermal designs chemical industry equipment including reactors, columns, heat exchangers, and ASME vessels—engineered for durability and complex processes.
- [Formaldehyde Converters and Resin  ](https://harristhermal.com/formaldehyde-converters-and-resin/) - Harris Thermal designs formaldehyde converters, reactors, and resin equipment. ASME pressure vessels and heat exchangers built for reliable chemical production.
- [Mining and Minerals Equipment ](https://harristhermal.com/mining-and-minerals-equipment/) - Durable mining and minerals equipment from Harris Thermal. Autoclaves, pressure vessels, evaporators, and exchangers built for the toughest conditions.
- [Food Processing Equipment](https://harristhermal.com/food-processing-equipment/) - Reliable food processing equipment engineered for efficiency and durability. Harris Thermal builds fry oil heaters, evaporators, exchangers & vessels.
- [Water Treatment ](https://harristhermal.com/water-treatment/) - Harris Thermal engineers ASME vessels, heat exchangers, evaporators, and crystallizers for water treatment systems—trusted solutions since 1885.
- [Power Generation ](https://harristhermal.com/power-generation/) - Harris Thermal engineers ASME pressure vessels, heat exchangers, and custom process equipment for the power generation industry. Trusted since 1885
- [Pulp and Paper Industry Solutions ](https://harristhermal.com/pulp-and-paper-industry-solutions/) - Harris Thermal provides custom-engineered process equipment for pulp and paper mills, including ASME vessels, heat exchangers, evaporators, and tanks engineered since 1885 for efficiency and long service life.
- [Oil and Gas Industry Solutions ](https://harristhermal.com/oil-and-gas-industry-solutions/) - Harris Thermal provides custom process equipment for the oil and gas industry, from ASME pressure vessels to API tanks and TEMA heat exchangers. Engineered since 1885 for safety and reliability.
- [Certifications](https://harristhermal.com/certifications/) - Explore Harris Thermal’s ASME, PED, CRN, and TEMA certifications ensuring top-quality, compliant heat exchangers and pressure vessels for global industries.
- [Industries Served](https://harristhermal.com/industries-served/) - Harris Thermal serves diverse industries with custom ASME equipment for energy, chemicals, water, food, mining, and manufacturing worldwide.
- [Shell and Tube Heat Exchangers](https://harristhermal.com/shell-and-tube-heat-exchangers/) - Shell and tube exchangers come in many variations to meet process requirements in almost every industry or application. They deliver reliable heat transfer performance by utilizing a high turbulence and counter flow, making one or more passes. Harris Thermal also can provide turbulators to enhance heat transfer efficiency. Shell and Tube heat exchangers are most
- [Purchase Order Standard Terms and Conditions](https://harristhermal.com/purchase-order-standard-terms-and-conditions/) - Applicable Terms. Purchase of Goods and/or Services by Harris Thermal Transfer Products, Inc. its subsidiaries and affiliated companies (“Buyer”) placed through this purchase order (“Order”) may be accepted by supplier/vendor/contractor (“Seller”) only in accordance with the terms hereof, unless the parties have entered into a mutually executed written master agreement stating applicable terms and conditions
- [Safety](https://harristhermal.com/safety/) - Harris Thermal Transfer Products is fully committed to providing a safe working environment for our employees and visiting customers. At Harris Thermal Transfer Products, we take safety very seriously. Providing a safe working environment for our employees and customers backed up by our written safety manual and training is our first priority. Being environmentally conscious
- [Employment](https://harristhermal.com/employment/) - Harris Thermal is located in Newberg, Oregon in the heart of Oregon Wine Country. Harris Thermal has been around for more than 135 years manufacturing high quality equipment that is proudly built in the USA. In addition to adopting sustainable practices, our equipment is used all over the world by leading manufacturers. We provide process
- [Employment Application](https://harristhermal.com/employment-application/) - Please complete all requested information.This application is good for 90 days only. Consideration for employment after 90 days requires a new application. HARRIS THERMAL TRANSFER PRODUCTS, INC. is an Equal Opportunity Employer.
- [Fabrication](https://harristhermal.com/fabrication/) - With more than 135 years of continuous operation and over 50,000 sq. ft. manufacturing space we have developed the knowledge and experience to meet all your fabrication needs. Our philosophy of keeping all our operations in-house (i.e. machining, burning, forming etc.) means we control our projects from start to finish. No excuses that our subcontractors
- [Repairs](https://harristhermal.com/repairs/) - At Harris Thermal we understand the importance of downtime due to issues with equipment. We have highly trained fabricators capable of performing onsite repairs to get you back up and running. Harris Thermal can offer a Test and Evaluate service of any heat exchanger or other process equipment you may have. Our NDE procedures allow
- [Machining / Drilling](https://harristhermal.com/machining-drilling/) - Since HTTP has all the equipment needed to machine all parts required to fabricate heat exchangers and other demanding process equipment, we are also able to provide machining services. Check out our capabilities page to see what equipment we have. HTTP can provide CNC tubesheet drilling, CNC Plate Rolling, Press Brake, parts burning/water jet cutting
- [Pressure Vessels / Tanks](https://harristhermal.com/pressure-vessels-tanks/) - At Harris Thermal Transfer Products, we are pleased to provide the highest quality pressure vessels. Our knowledge and expertise allow us to provide custom design and fabrication of pressure vessels that comply with all standards of Section VIII, Division 1, of the ASME code. Our certified specialists can produce superior products to the most stringent
- [Resources](https://harristhermal.com/resources/) - Heat exchangers are considered the workhorse in chemical plants and refineries. They come in all shapes, sizes, and configurations and are essential in extracting or adding heat to various process fluids. Figure 7.1 (TEMA, 1999), shows various shapes of commonly used heat exchangers. TEMA stands for “Tubular Exchangers Manufacturers Association” and is a set of
- [Get a Quote](https://harristhermal.com/get-a-quote/) - If you would like to engage our team to help you with an upcoming project, please provide us with the following information:
- [Capabilities](https://harristhermal.com/capabilities/) - Harris Thermal transfer Products have been meeting our customer’s needs for more than 135 years. Our manufacturing facility in Newberg Oregon is situated on 7 acres with more than 50,000 sq. ft. of fabrication space and an overhead lifting capacity of 200,000 pounds. Our fabrication bays are supported by a dedicated machine shop capable of
- [Logistics & Shipping](https://harristhermal.com/logistics-and-shipping/) - Need help with shipping? Our shipping and receiving department can ship or arrange shipments to your destination and get the best pricing with multiple quotes and existing relationships. We can ship or arrange cross county shipments with our dedicated shipping and receiving department personnel. We have a variety of Semi’s, trucks and trailers so that
- [Quality Control](https://harristhermal.com/quality-control-safety/) - Our quality control department is second to none and have the credentials to back it up with ASNT level III certified RT, PT, UT, VT personnel. Our quality control department performs most all of the testing required in-house by ASNT level III certified personnel. Our third party Authorized Inspection Agency is Hartford Steam Boiler Inspection
- [Engineering](https://harristhermal.com/engineering/) - Our highly experienced engineering staff can provide mechanical and thermal designs to meet our customer’s most stringent specifications and complex configurations. We have a full in-house engineering staff ready to expertly design your most complicated Pressure Vessel or Heat Exchanger. But we are not limited there, we can design other equipment as well. We can
- [Materials](https://harristhermal.com/materials/) - We stock a wide variety of materials and have purchased at opportune times to bring savings to our customers. We also have experience in fabrication, forming and machining a wide variety of materials including Stainless Steel, Nickel, Monel, Hastelloy, Inconel, Titanium and many more varieties. In our 135 years of operation we have formed, machined
- [Machining](https://harristhermal.com/machining/) - We complement our fabrication expertise with a fully capable dedicated machine shop. Meeting our machining needs in-house means that we are in control our production schedule and not relying on out-sourcing so that we can meet our customer’s delivery needs without excuses. We have chosen to keep all our machining needs in-house so that we
- [Products / Services](https://harristhermal.com/products-services/) - Harris Thermal offers a wide variety of products and services including shell-and-tube heat exchangers, pressure vessels, piping and ducting, evaporators, reactors, condensers, converters, columns, separators, vapor bodies, storage tanks, skids and mining equipment. Construction materials include, but are not limited to, nickel and high nickel alloys, austenitic and duplex stainless steels, 6 Moly alloys, titanium,
- [Users List Item](https://harristhermal.com/user-list-item/) - [uwp_users_item]
- [Forgot Password?](https://harristhermal.com/forgot/) - [uwp_forgot]
- [Reset Password](https://harristhermal.com/reset/) - [uwp_reset]
- [Change Password](https://harristhermal.com/change/) - [uwp_change]
- [Profile](https://harristhermal.com/profile/) - [uwp_profile]
- [Users](https://harristhermal.com/users/) - [uwp_users]
- [Register](https://harristhermal.com/register/) - [uwp_register]
- [Account](https://harristhermal.com/account/) - [uwp_account]
- [Login](https://harristhermal.com/login/) - [uwp_login]
- [GD Details](https://harristhermal.com/gd-details/) - [gd_notifications] [gd_post_images title='' types='' fallback_types='' ajax_load='true' limit='' limit_show='' css_class='' type='slider' slideshow='true' controlnav='1' animation='slide' show_title='true' show_caption='true' image_size='' aspect='' cover='' link_to='' link_screenshot_to='' bg='' mt='' mr='' mb='' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_single_taxonomies taxonomy='' prefix='' link_style='' link_color='' link_color_custom='' link_icon='false' mt='' mr='' mb='2' ml='' pt='' pr='' pb='' pl='' ] [gd_single_tabs show_as_list='false' output='' tab_style='' disable_greedy='false'
- [GD Archive Item](https://harristhermal.com/gd-archive-item/) - [gd_archive_item_section type='open' position='left' ] [gd_post_badge id='' key='featured' condition='is_not_empty' search='' icon_class='' badge='Featured' link='' new_window='false' popover_title='' popover_text='' cta='' tooltip_text='' hover_content='' hover_icon='' type='' shadow='' color='' bg_color='#fd4700' txt_color='#ffffff' size='' alignment='' position='ab-top-left-angle' mt='' mr='' mb='' ml='' list_hide='' list_hide_secondary='' css_class='' ] [gd_post_badge id='' key='post_date' condition='is_less_than' search='+30' icon_class='' badge='New' link='' new_window='false' popover_title='' popover_text='' cta='' tooltip_text='' hover_content='' hover_icon='' type='' shadow='' color='' bg_color='#ff0000' txt_color='#ffffff'
- [GD Archive](https://harristhermal.com/gd-archive/) - [gd_notifications] [gd_search bg='' mt='' mr='' mb='3' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_loop_actions bg='' mt='' mr='' mb='3' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_loop layout='2' row_gap='' column_gap='' card_border='' card_shadow='' bg='' mt='' mr='' mb='' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_loop_paging show_advanced='' bg='' mt=''
- [Location](https://harristhermal.com/location/) - [gd_notifications] [gd_categories title='' post_type='0' cpt_title='false' title_tag='h4' cpt_ajax='false' filter_ids='' hide_empty='true' hide_count='false' hide_icon='false' use_image='false' cpt_left='false' sort_by='count' max_level='1' max_count='all' max_count_child='all' no_cpt_filter='false' no_cat_filter='false' design_type='icon-top' row_items='' card_padding_inside='' card_color='' icon_color='' icon_size='box-medium' bg='' mt='' mr='' mb='3' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_map title='' width='100%' height='300px' maptype='ROADMAP' zoom='0' map_type='directory' post_settings='true' post_type='' terms='' tick_terms='' tags='' all_posts='false' post_id='' search_filter='true' post_type_filter='true'
- [Search page](https://harristhermal.com/search/) - [gd_notifications] [gd_search bg='' mt='' mr='' mb='3' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_loop_actions bg='' mt='' mr='' mb='3' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_loop layout='2' row_gap='' column_gap='' card_border='' card_shadow='' bg='' mt='' mr='' mb='' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ] [gd_loop_paging show_advanced='' bg='' mt=''
- [Add Listing](https://harristhermal.com/add-listing/) - [gd_notifications] [gd_add_listing post_type='' show_login='true' login_msg='' container='' mapzoom='0' label_type='' bg='' mt='' mr='' mb='3' ml='' pt='' pr='' pb='' pl='' border='' rounded='' rounded_size='' shadow='' ]
- [Blog](https://harristhermal.com/blog/)
- [About](https://harristhermal.com/about/) - Who am I? A designer & developer living in Phoenix, AZ with over 10 years experience working with companies you know & love. Suscipit taciti primis tempor sagittis euismod libero facilisi aptent elementum felis blandit cursus gravida sociis eleifend lectus nullam dapibus netus feugiat curae curabitur. Curae fringilla porttitor quam sollicitudin iaculis aptent leo ligula
- [Portfolio Single Template](https://harristhermal.com/portfolio-single-template/) - Company Name Headline describing the project Scope of Project Online presence audit & competitor research Search engine optimization strategy Architecture planning & wireframes Website design & WordPress development Project Summary Suscipit taciti primis tempor sagittis euismod libero facilisi aptent elementum felis blandit cursus gravida sociis eleifend lectus nullam dapibus netus feugiat curae curabitur. Curae fringilla
- [Portfolio](https://harristhermal.com/portfolio-4/) - Design & Development Client projects I recently completed Custom Theme View Project Branding View Project Ecommerce Website View Project Application Design View Project Testimonials "Vivamus integer non suscipit taciti etiam primis tempor sagittis, euismod libero facilisi aptent felis blandit cursus gravida sociis." – Name @ Company "Vivamus integer non suscipit taciti etiam primis tempor sagittis,
- [Slide Anything Popup Preview](https://harristhermal.com/slide-anything-popup-preview/) - [slide-anything id='115']
- [](https://harristhermal.com/sample-page/) - [smartslider3 slider="1"] Hi there! I'm a bike messenger by day, aspiring actor by night, and this is my website. I live in Los Angeles, have a great dog named Jack, and I like piña coladas. (And gettin' caught in the rain.) ...or something like this: The XYZ Doohickey Company was founded in 1971, and has

## Categories

- [Uncategorized](https://harristhermal.com/category/uncategorized/)
- [Projects](https://harristhermal.com/category/projects/)
- [Pressure Vessels](https://harristhermal.com/category/industry-insights/pressure-vessels/)
- [Heat Exchangers](https://harristhermal.com/category/industry-insights/heat-exchangers/)
- [Industry Standards & Compliance](https://harristhermal.com/category/industry-insights/industry-standards-compliance/)
- [Materials & Metallurgy](https://harristhermal.com/category/industry-insights/materials-metallurgy/)
- [Manufacturing Capabilities](https://harristhermal.com/category/industry-insights/manufacturing-capabilities/)
- [Industry Insights](https://harristhermal.com/category/industry-insights/)

## Tags

- [asme section viii](https://harristhermal.com/tag/asme-section-viii/)
- [bpvc 2026](https://harristhermal.com/tag/bpvc-2026/)
- [appendix 47](https://harristhermal.com/tag/appendix-47/)
- [material verification](https://harristhermal.com/tag/material-verification/)
- [u-stamp](https://harristhermal.com/tag/u-stamp/)
- [division 1](https://harristhermal.com/tag/division-1/)
- [division 2](https://harristhermal.com/tag/division-2/)
- [orbital tube welding](https://harristhermal.com/tag/orbital-tube-welding/)
- [welding automation](https://harristhermal.com/tag/welding-automation/)
- [tube-to-tubesheet](https://harristhermal.com/tag/tube-to-tubesheet/)
- [autogenous welding](https://harristhermal.com/tag/autogenous-welding/)
- [welding labor shortage](https://harristhermal.com/tag/welding-labor-shortage/)
- [shell and tube heat exchangers](https://harristhermal.com/tag/shell-and-tube-heat-exchangers/)
- [tema standards](https://harristhermal.com/tag/tema-standards/)
- [flow-induced vibration](https://harristhermal.com/tag/flow-induced-vibration/)
- [heat exchanger design](https://harristhermal.com/tag/heat-exchanger-design/)
- [explosion bonding](https://harristhermal.com/tag/explosion-bonding/)
- [falling film evaporators](https://harristhermal.com/tag/falling-film-evaporators/)
- [zero-liquid discharge](https://harristhermal.com/tag/zero-liquid-discharge/)
- [tubesheets](https://harristhermal.com/tag/tubesheets/)
- [thermal simulation](https://harristhermal.com/tag/thermal-simulation/)
- [fouling](https://harristhermal.com/tag/fouling/)
- [pressure vessel design](https://harristhermal.com/tag/pressure-vessel-design/)
- [manual tig welding](https://harristhermal.com/tag/manual-tig-welding/)
- [fabrication productivity](https://harristhermal.com/tag/fabrication-productivity/)
- [gtaw](https://harristhermal.com/tag/gtaw/)
- [stainless steel](https://harristhermal.com/tag/stainless-steel/)
- [marangoni effect](https://harristhermal.com/tag/marangoni-effect/)
- [weld purging](https://harristhermal.com/tag/weld-purging/)
- [tube fabrication](https://harristhermal.com/tag/tube-fabrication/)
- [tema](https://harristhermal.com/tag/tema/)
- [maintenance costs](https://harristhermal.com/tag/maintenance-costs/)
- [floating head](https://harristhermal.com/tag/floating-head/)
- [tubesheet design](https://harristhermal.com/tag/tubesheet-design/)
- [service life](https://harristhermal.com/tag/service-life/)
- [asme bpvc](https://harristhermal.com/tag/asme-bpvc/)
- [design-by-analysis](https://harristhermal.com/tag/design-by-analysis/)
- [titanium](https://harristhermal.com/tag/titanium/)
- [metallurgical risks](https://harristhermal.com/tag/metallurgical-risks/)
- [shell and tube heat exchanger](https://harristhermal.com/tag/shell-and-tube-heat-exchanger/)
- [tema class r](https://harristhermal.com/tag/tema-class-r/)
- [thermal shock](https://harristhermal.com/tag/thermal-shock/)
- [tube bundle](https://harristhermal.com/tag/tube-bundle/)
- [baffles](https://harristhermal.com/tag/baffles/)
- [falling film evaporator](https://harristhermal.com/tag/falling-film-evaporator/)
- [process equipment](https://harristhermal.com/tag/process-equipment/)
- [tema classes](https://harristhermal.com/tag/tema-classes/)
- [tema class b](https://harristhermal.com/tag/tema-class-b/)
- [tema class c](https://harristhermal.com/tag/tema-class-c/)
- [refinery service](https://harristhermal.com/tag/refinery-service/)
- [evaporation](https://harristhermal.com/tag/evaporation/)
- [heat transfer](https://harristhermal.com/tag/heat-transfer/)
- [thermal degradation](https://harristhermal.com/tag/thermal-degradation/)
- [mechanical vapor recompression](https://harristhermal.com/tag/mechanical-vapor-recompression/)
- [mvr](https://harristhermal.com/tag/mvr/)
- [viscosity](https://harristhermal.com/tag/viscosity/)
- [heat exchanger manufacturer](https://harristhermal.com/tag/heat-exchanger-manufacturer/)
- [ahri standard 400](https://harristhermal.com/tag/ahri-standard-400/)
- [shell and tube](https://harristhermal.com/tag/shell-and-tube/)
- [asme](https://harristhermal.com/tag/asme/)
- [in-house fabrication](https://harristhermal.com/tag/in-house-fabrication/)
- [proprietary design](https://harristhermal.com/tag/proprietary-design/)
- [maintenance](https://harristhermal.com/tag/maintenance/)
- [plate heat exchangers](https://harristhermal.com/tag/plate-heat-exchangers/)
- [equipment specification](https://harristhermal.com/tag/equipment-specification/)
- [mechanical standards](https://harristhermal.com/tag/mechanical-standards/)
- [pressure vessel compliance](https://harristhermal.com/tag/pressure-vessel-compliance/)
- [non-code vessels](https://harristhermal.com/tag/non-code-vessels/)
- [bpvc](https://harristhermal.com/tag/bpvc/)
- [jurisdictional requirements](https://harristhermal.com/tag/jurisdictional-requirements/)
- [material traceability](https://harristhermal.com/tag/material-traceability/)
- [tube wetting](https://harristhermal.com/tag/tube-wetting/)
- [high-nickel alloys](https://harristhermal.com/tag/high-nickel-alloys/)
- [vapor recompression](https://harristhermal.com/tag/vapor-recompression/)
- [chemical processing](https://harristhermal.com/tag/chemical-processing/)
- [pharmaceutical recovery](https://harristhermal.com/tag/pharmaceutical-recovery/)
- [zld systems](https://harristhermal.com/tag/zld-systems/)
- [wastewater treatment](https://harristhermal.com/tag/wastewater-treatment/)
- [thermal evaporation](https://harristhermal.com/tag/thermal-evaporation/)
- [crystallization](https://harristhermal.com/tag/crystallization/)
- [reverse osmosis](https://harristhermal.com/tag/reverse-osmosis/)
- [water recovery](https://harristhermal.com/tag/water-recovery/)
- [environmental compliance](https://harristhermal.com/tag/environmental-compliance/)
- [industrial evaporators](https://harristhermal.com/tag/industrial-evaporators/)
- [feed analysis](https://harristhermal.com/tag/feed-analysis/)
- [scaling](https://harristhermal.com/tag/scaling/)
- [metallurgy selection](https://harristhermal.com/tag/metallurgy-selection/)
- [process engineering](https://harristhermal.com/tag/process-engineering/)
- [equipment lifespan](https://harristhermal.com/tag/equipment-lifespan/)
- [corrosion](https://harristhermal.com/tag/corrosion/)
- [metallurgy](https://harristhermal.com/tag/metallurgy/)
- [api 650](https://harristhermal.com/tag/api-650/)
- [api 620](https://harristhermal.com/tag/api-620/)
- [storage tanks](https://harristhermal.com/tag/storage-tanks/)
- [15 psi threshold](https://harristhermal.com/tag/15-psi-threshold/)
- [boiler and pressure vessel code](https://harristhermal.com/tag/boiler-and-pressure-vessel-code/)
- [reboilers](https://harristhermal.com/tag/reboilers/)
- [distillation columns](https://harristhermal.com/tag/distillation-columns/)
- [kettle reboiler](https://harristhermal.com/tag/kettle-reboiler/)
- [thermosiphon](https://harristhermal.com/tag/thermosiphon/)
- [forced circulation](https://harristhermal.com/tag/forced-circulation/)
- [asme u-stamp](https://harristhermal.com/tag/asme-u-stamp/)
- [pressure vessel certification](https://harristhermal.com/tag/pressure-vessel-certification/)
- [form u-1](https://harristhermal.com/tag/form-u-1/)
- [authorized inspection agency](https://harristhermal.com/tag/authorized-inspection-agency/)
- [quality assurance](https://harristhermal.com/tag/quality-assurance/)
- [food processing](https://harristhermal.com/tag/food-processing/)
- [nde inspection](https://harristhermal.com/tag/nde-inspection/)
- [hastelloy](https://harristhermal.com/tag/hastelloy/)
- [inconel](https://harristhermal.com/tag/inconel/)
- [zirconium](https://harristhermal.com/tag/zirconium/)
- [en 13445](https://harristhermal.com/tag/en-13445/)
- [section viii](https://harristhermal.com/tag/section-viii/)
- [nqa-1](https://harristhermal.com/tag/nqa-1/)
- [nuclear quality assurance](https://harristhermal.com/tag/nuclear-quality-assurance/)
- [liquid cooling](https://harristhermal.com/tag/liquid-cooling/)
- [data centers](https://harristhermal.com/tag/data-centers/)
- [ashrae](https://harristhermal.com/tag/ashrae/)
- [coolant distribution unit](https://harristhermal.com/tag/coolant-distribution-unit/)
- [autoclaves](https://harristhermal.com/tag/autoclaves/)
- [pressure leaching](https://harristhermal.com/tag/pressure-leaching/)
- [mineral processing](https://harristhermal.com/tag/mineral-processing/)
- [corrosion resistance](https://harristhermal.com/tag/corrosion-resistance/)