Skip to content
ASME U & R Stamp · TEMA · NQA-1 Quality Program Call us: 800-767-9507
Harris Thermal
Products & Services Overview Shell & Tube Heat Exchangers Pressure Vessels / Tanks Other Fabrication Machining / Drilling Repairs
Industries Overview Oil & Gas Chemical Formaldehyde & Resins Pulp & Paper Food Processing Mining & Minerals Power Generation Nuclear Data Centers Water Treatment Sugar Processing LNG General Manufacturing
Capabilities Overview Fabrication Machining Materials Engineering Quality Control Safety Logistics & Shipping
Resources
About About Us Certifications Employment
Contact Get a Quote →

Industry Insights

  1. Thermal energy storage tanks for data centers: design, stratification, and cooling reliability

    Thermal energy storage (TES) tanks help data center cooling plants store chilled water for use when cooling demand, equipment availability, or operating conditions change. But tank volume alone does not determine how much cooling a system can deliver. Thermal stratification, diffuser performance, usable temperature…

    Pressure Vessels, Industry Standards & Compliance, Industry Insights

    Read more

  2. Heat exchangers for carbon capture: CO2 cooling, condensation, and cryogenic processing

    Carbon capture heat exchangers handle a fluid that changes character from one end of the plant to the other. Captured CO2 typically leaves a solvent stripper as a warm, water-saturated gas at low pressure. It may leave the site as a dense fluid above 2,000 psig, or as a refrigerated liquid held only about 40 psi (3…

    Heat Exchangers, Industry Insights, Materials & Metallurgy

    Read more

  3. Geothermal heat exchangers and pressure vessels: design considerations for power generation

    In conventional and enhanced geothermal systems, heat exchangers and pressure vessels must often handle a fluid that no one designed. Produced geothermal brine arrives from the reservoir hot, pressurized and carrying dissolved silica, carbonate, chloride and gases in equilibrium with rock miles below the surface. Every…

    Heat Exchangers, Pressure Vessels, Industry Insights

    Read more

  4. Industrial gasket selection for pressure vessels and heat exchangers: materials, joint geometry, and bolt load

    A gasket is specified from a chemical compatibility chart, the material is correct for the fluid, and the joint leaks anyway. On the next turnaround the specification moves to a more expensive material that also leaks. The chart was never wrong. It answered a question about chemistry while the joint was failing on…

    Pressure Vessels, Heat Exchangers, Materials & Metallurgy

    Read more

  5. Clad pressure vessels: when clad construction makes more sense than solid alloy

    A corrosive process may require titanium, a nickel alloy or a high-molybdenum stainless steel at the wetted surface. That requirement applies to the surface the process touches. It does not automatically apply to the full thickness of the pressure boundary behind it. Clad construction separates those two jobs. A…

    Industry Insights, Industry Standards & Compliance, Materials & Metallurgy, Pressure Vessels

    Read more

  6. Pressure leaching and autoclaves in mineral processing: how the process works and what the equipment must handle

    Pressure leaching dissolves or transforms target minerals inside a sealed vessel held above the normal boiling point of the solution. Raising temperature accelerates reactions that run too slowly at atmospheric conditions. Raising pressure keeps the aqueous phase liquid and forces reactant gas into solution. The vessel…

    Industry Insights, Materials & Metallurgy, Pressure Vessels

    Read more

Ready to start your next project?

Tell us about your application, timeline, and budget — our engineering team will help you get it built right the first time.